FRONT SEAT ASSEMBLY(for Manual Seat) REASSEMBLY

PROCEDURE


  1. INSTALL SEAT TRACK ADJUSTING HANDLE


    1. A004VP2E02
      Text in Illustration
      *1 Hook
      *2 Handle End

      Engage the 2 hooks and 2 handle ends to install the seat track adjusting handle.

  2. INSTALL SEPARATE TYPE FRONT SEATBACK SPRING ASSEMBLY


    1. A004XWY

      Install the separate type front seatback spring assembly with the 4 bolts.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  3. INSTALL FRONT SEAT WIRE (w/ Seat Heater System)


    1. A005000

      Engage the 2 clamps to install the front seat wire.

  4. INSTALL SEAT HEATER CONTROL SUB-ASSEMBLY (w/ Seat Heater System)


    1. A004ZIC

      Engage the 2 clamps to install the seat heater control sub-assembly.

    2. Connect the connector.

  5. INSTALL SEAT POSITION AIRBAG SENSOR (for Driver Side)

    Click here

  6. INSTALL FRONT SEAT CUSHION EDGE PROTECTOR LH (for 6 Way Seat Type)


    1. A004YVX

      Engage the 2 guides.

    2. Install the front seat cushion edge protector LH with the screw.

  7. INSTALL FRONT SEAT CUSHION EDGE PROTECTOR LH (for 4 Way Seat Type)


    1. A004ZGT

      Engage the 2 guides.

    2. Install the front seat cushion edge protector LH with the screw.

  8. INSTALL FRONT SEAT CUSHION EDGE PROTECTOR RH (for 6 Way Seat Type)


    1. A004YYA

      Engage the 2 guides.

    2. Install the front seat cushion edge protector RH with the screw.

  9. INSTALL FRONT SEAT CUSHION EDGE PROTECTOR RH (for 4 Way Seat Type)


    1. A004VFT

      Engage the 2 guides.

    2. Install the front seat cushion edge protector RH with the screw.

  10. INSTALL RECLINING ADJUSTER INSIDE COVER LH


    1. A004ZVV

      Engage the guide to install the reclining adjuster inside cover LH.

  11. INSTALL RECLINING ADJUSTER INSIDE COVER RH


    1. A004XNQ

      Engage the guide to install the reclining adjuster inside cover RH.

  12. INSTALL FRONT SEAT LOWER CUSHION SHIELD LH (for 6 Way Seat Type)


    1. A004WQT

      Engage the clip.

    2. Engage the hook as shown in the illustration.

    3. Install the front seat lower cushion shield LH with the screw.

  13. INSTALL FRONT SEAT LOWER CUSHION SHIELD RH (for 6 Way Seat Type)


    1. A004ZC6

      Engage the clip.

    2. Engage the hook as shown in the illustration.

    3. Install the front seat lower cushion shield RH with the screw.

  14. INSTALL FRONT SEAT AIRBAG ASSEMBLY

    Click here

  15. INSTALL FRONT SEATBACK COVER


    1. Clean the front seatback frame surface.

    2. A004Z2GE01
      Text in Illustration
      *1 Double-sided Tape

      Apply 4 pieces of double-sided tape to install a new front seatback cover to the front seatback frame.

  16. INSTALL FRONT SEAT CUSHION COVER


    1. Clean the front seat cushion frame surface.

    2. A004XT0E02
      Text in Illustration
      *1 Double-sided Tape

      Apply 3 pieces of double-sided tape to install a new front seat cushion cover to the front seat cushion frame.

  17. INSTALL SEPARATE TYPE FRONT SEATBACK COVER


    1. Using hog ring pliers, install the separate type front seatback cover to the separate type front seatback pad with 14 new hog rings.

      A004WNT

      Note


      • Be careful not to damage the separate type front seatback cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seatback cover.

  18. INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD


    1. Temporarily install the separate type front seatback cover with pad to the front seatback frame.

    2. A004ZY0E02

      Attach the bracket of the separate type front seatback cover to the front seatback spring assembly in the order indicated in the illustration.

    3. Install the separate type front seatback cover bracket with the nut.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

      CAUTION:


      • For vehicles with side airbags, the seatback cover must be securely installed. Otherwise, the side airbags may not deploy properly.

      • Make sure that the strap is not twisted after installing the bracket.

      • Install the bracket securely.

    4. A00500G

      Engage the 4 claws to install the 2 front seat headrest supports.

    5. A004ZJN

      Engage the fastener.

    6. A004ZHV

      Close the 2 fasteners.

    7. A004YYO

      Using hog ring pliers, install the separate type front seatback cover to the separate type front seat back pad with 5 new hog rings.

      Note


      • Be careful not to damage the separate type front seatback cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seatback cover.

    8. A004XF2

      Engage the 2 fasteners.

  19. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with 21 new hog rings.

      A004X06

      Note


      • Be careful not to damage the separate type front seat cushion cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.

    2. A004Z7V

      Using hog ring pliers, install 2 new hog rings.

      Note


      • Be careful not to damage the separate type front seat cushion cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.

  20. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD


    1. Temporarily install the separate type front seat cushion cover with pad to the front seat cushion frame.

    2. A004VUP

      Engage each hook.

    3. A004ZYX

      Engage the 4 hooks.

    4. for Front Passenger Side:


      1. A004YCZ

        Engage the clamp to connect the connector as shown in the illustration.

    5. w/ Seat Heater System:


      1. A004ZKN

        Engage the 2 clamps to connect the seat heater wire harness.

      2. Connect the connector.

      3. B001N11

        Engage the clamp to connect the seat heater wire harness.

      4. Connect the connector.

    6. B001MN3

      Engage the fastener to secure the side airbag wire harness.

    7. A004XS8

      Connect the rubber band.

  21. INSTALL FRONT SEAT INNER CUSHION SHIELD


    1. A00500D

      Engage the 4 claws to install the front seat inner cushion shield.

  22. INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)

    Click here

  23. INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)

    Click here

  24. INSTALL FRONT SEAT CUSHION SHIELD


    1. A004XTQ

      Engage the clip.

    2. Engage the 11 claws.

    3. Install the front seat cushion shield with the screw.

  25. INSTALL VERTICAL ADJUSTING HANDLE (for 6 Way Seat Type)


    1. A004ZXT

      Install the vertical adjusting handle with the screw.

  26. INSTALL RECLINING ADJUSTER RELEASE HANDLE


    1. A005024

      Engage the claw to install the reclining adjuster release handle.

  27. INSTALL SEAT ADJUSTER COVER CAP


    1. A004ZBG

      Install the seat adjuster cover cap.

      Tech Tips

      Use the same procedure for the RH side and LH side.