DATA LIST
Tech Tips
Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Note
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Turn the power switch off.
Connect the intelligent tester to the DLC3.
Turn the power switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Body / Mirror L*1 or Mirror R*2 / Data List.
Read the Data List according to the display on the intelligent tester.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| Seat Memory Switch 1 | M1 switch / ON or OFF | ON: M1 switch on OFF: M1 switch off |
- |
| Seat Memory Switch 2 | M2 switch / ON or OFF | ON: M2 switch on OFF: M2 switch off |
- |
| Seat Memory Switch 3 | M3 switch / ON or OFF | ON: M3 switch on OFF: M3 switch off |
- |
| Seat Memory Set Switch | SET switch / ON or OFF | ON: SET switch on OFF: SET switch off |
- |
*1: for LHD
*2: for RHD
Enter the following menus: Body / Driver Seat / Data List.
Read the Data List according to the display on the intelligent tester.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| Reclining Rear | Reclining switch signal (Rearward) / ON or OFF | ON: Reclining switch (Rearward) on OFF: Reclining switch (Rearward) off |
- |
| Reclining Front | Reclining switch signal (Forward) / ON or OFF | ON: Reclining switch (Forward) on OFF: Reclining switch (Forward) off |
- |
| Front Vertical Down | Front vertical switch signal (Downward) / ON or OFF | ON: Front vertical switch (Downward) on OFF: Front vertical switch (Downward) off |
- |
| Front Vertical Up | Front vertical switch signal (Upward) / ON or OFF | ON: Front vertical switch (Upward) on OFF: Front vertical switch (Upward) off |
- |
| Lifter Switch Down | Lifter switch signal (Downward) / ON or OFF | ON: Lifter switch (Downward) on OFF: Lifter switch (Downward) off |
- |
| Lifter Switch Up | Lifter switch signal (Upward) / ON or OFF | ON: Lifter switch (Upward) on OFF: Lifter switch (Upward) off |
- |
| Slide Rear | Sliding switch signal (Rearward) / ON or OFF | ON: Sliding switch (Rearward) on OFF: Sliding switch (Rearward) off |
- |
| Slide Front | Sliding switch signal (Forward) / ON or OFF | ON: Sliding switch (Forward) on OFF: Sliding switch (Forward) off |
- |
| Seat Memory No1 | Seat position memorized with M1 switch / Mem or Not Mem | Mem: Memorized Not Mem: Not memorized |
- |
| Seat Memory No2 | Seat position memorized with M2 switch / Mem or Not Mem | Mem: Memorized Not Mem: Not memorized |
- |
| Seat Memory No3 | Seat position memorized with M3 switch / Mem or Not Mem | Mem: Memorized Not Mem: Not memorized |
- |
| Ignition Switch | Communication state of power switch signal / ON or OFF | ON: Power switch on (IG) signal received OFF: Power switch off signal not received |
- |
| P Switch* | Park (P) state signal / ON or OFF | ON: Park (P) selected OFF: Shift state other than park (P) selected |
Not applicable |
| Parking Brake SW | Parking brake switch status / ON or OFF | ON: Parking brake applied OFF: Parking brake released |
- |
| Vehicle Speed | Vehicle speed data / min.: 0 km/h (0 mph), max.: 255 km/h (158 mph) | Actual vehicle speed | - |
| Power Voltage | Power supply for position control ECU and switch assembly / min: 0 V, max: 19.89 V | Within range from 11 V to 14 V | - |
| Slide Position | Seat sliding position / min: 0000, max: 65535 | 0: Foremost sliding position 65535: Rearmost sliding position |
- |
| Reclining Position | Seat reclining position / min: 0000, max: 65535 | 0: Rearmost reclining position 65535: Foremost reclining position |
- |
| Front Vertical Position | Seat front vertical position / min: 0000, max: 65535 | 0: Uppermost front vertical position 65535: Lowermost front vertical position |
- |
| Lifter Position | Seat lifter position / min: 0000, max: 65535 | 0: Uppermost lifter position 65535: Lowermost lifter position |
- |
| Slide Pos Mem No1 | Seat sliding position memorized with M1 switch / min: 0000, max: 65535 | 0: Foremost sliding position 65535: Rearmost sliding position |
- |
| Reclining Pos Mem No1 | Seat reclining position memorized with M1 switch / min: 0000, max: 65535 | 0: Foremost reclining position 65535: Rearmost reclining position |
- |
| Frnt Vrtcl Pos Mem No1 | Front vertical position memorized with M1 switch / min: 0000, max: 65535 | 0: Uppermost front vertical position 65535: Lowermost front vertical position |
- |
| Lifter Pos Mem No1 | Lifter position memorized with M1 switch / min: 0000, max: 65535 | 0: Uppermost lifter position 65535: Lowermost lifter position |
- |
| Slide Pos Mem No2 | Seat sliding position memorized with M2 switch / min: 0000, max: 65535 | 0: Foremost sliding position 65535: Rearmost sliding position |
- |
| Reclining Pos Mem No2 | Seat reclining position memorized with M2 switch / min: 0000, max: 65535 | 0: Foremost reclining position 65535: Rearmost reclining position |
- |
| Frnt Vrtcl Pos Mem No2 | Front vertical position memorized with M2 switch / min: 0000, max: 65535 | 0: Uppermost front vertical position 65535: Rearmost front vertical position |
- |
| Lifter Pos Mem No2 | Lifter position memorized with M2 switch / min: 0000, max: 65535 | 0: Uppermost lifter position 65535: Lowermost lifter position |
- |
| Slide Pos Mem No3 | Seat sliding position memorized with M3 switch / min: 0000, max: 65535 | 0: Foremost sliding position 65535: Rearmost sliding position |
- |
| Reclining Pos Mem No3 | Seat reclining position memorized with M3 switch / min: 0000, max: 65535 | 0: Foremost reclining position 65535: Rearmost most reclining position |
- |
| Frnt Vrtcl Pos Mem No3 | Front vertical position memorized with M3 switch / min: 0000, max: 65535 | 0: Uppermost front vertical position 65535: Lowermost front vertical position |
- |
| Lifter Pos Mem No3 | Lifter position memorized with M3 switch / min: 0000, max: 65535 | 0: Uppermost lifter position 65535: Lowermost lifter position |
- |
| Lifter Initialize Flag | Seat lifter limit position memory / ON or OFF | ON: Memorized OFF: Not memorized |
- |
| Front Vertical Init Flag | Seat front vertical limit position memory / ON or OFF | ON: Memorized OFF: Not memorized |
- |
| Reclining Position Init Flg | Seat reclining limit position memory / ON or OFF | ON: Memorized OFF: Not memorized |
- |
| Slide Position Init Flag | Seat sliding limit position memory / ON or OFF | ON: Memorized OFF: Not memorized |
- |
| Slide Position Front Limit | Seat slide limit position (front) / Min: 0, Max: 65535 | Within range from 0 to 65535 | - |
| Slide Position Rear Limit | Seat slide limit position (rear) / Min: 0, Max: 65535 | Within range from 0 to 65535 | - |
| Reclining Position Front Limit | Seat reclining limit position (front) / Min: 0, Max: 65535 | Within range from 0 to 65535 | - |
| Reclining Position Rear Limit | Seat reclining limit position (rear) / Min: 0, Max: 65535 | Within range from 0 to 65535 | - |
| Front Vertical UP Limit | Seat front vertical limit position (up) / Min: 0, Max: 65535 | Within range from 0 to 65535 | - |
| Front Vertical Down Limit | Seat front vertical limit position (down) / Min: 0, Max: 65535 | Within range from 0 to 65535 | - |
| Lifter Position UP Limit | Seat lifter limit position (up) / Min: 0, Max: 65535 | Within range from 0 to 65535 | - |
| Lifter Position Down Limit | Seat lifter limit position (down) / Min: 0, Max: 65535 | Within range from 0 to 65535 | - |
| Memory Button Buzzer Request | Driver seat buzzer request display / OFF, MOVE, REGISTRY, CANCEL, REG NG, REG WAIT | OFF: Buzzer does not sound MOVE: Request to sound buzzer when starting memory replay REGISTRY: Request to sound buzzer when starting memory registration CANCEL: Request to sound buzzer when canceling memory call registration REG NG: Request to sound buzzer when memory call registration not possible REG WAIT: Request to sound buzzer when starting memory call cabin scan |
- |
| Driver Seat Request Command | Driver seat operation request received / OFF, MEMORY, MEM MOV, MEM SOD, RET MOV, AWY MOV, AWY SOD, MEM AWY or MEM RET | OFF: No instruction MEMORY: Request to memorize MEM MOV: Request to recall memory MEM SOD: Request to replay RET MOV: Request to return AWY MOV: Request to move away AWY SOD: Request to recall away position memory MEM AWY: Request to recall memorized position of seatback MEM RET: Request to restore seatback to memorized position |
- |
| Driver Seat POS REQ | Seat memory switch operation value / OFF, MEM1, MEM2, MEM3, DRV1, DRV2 or DRV3 | OFF: No operation MEM1: M1 switch operation status MEM2: M2 switch operation status MEM3: M3 switch operation status DRV1: Other 1 operation status DRV2: Other 2 operation status DRV3: Other 3 operation status |
- |
| Away Move Range Scale* | The seat travel distance for the power easy access system / NONE, SMALL, STANDRD or LONG | NONE: Seat travel distance none SMALL: Seat travel distance short STANDRD: Seat travel distance normal LONG: Seat travel distance long |
Not applicable |
| Shift SW Position | Park state signal / Shift P or Shift Other | Shift P: Shift lever in P Shift Other: Shift lever in a position other than P |
- |
| Number of Trouble Codes* | Number of trouble codes/Min.: 0 or Max.: 255 | Number of DTCs will be displayed | Not applicable |
*: Although the item is displayed on the intelligent tester, it is not applicable to this vehicle.
Enter the following menus: Body / Main Body / Data List.
Read the Data List according to the display on the intelligent tester.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| FR Door Courtesy*2 | Front door courtesy light switch assembly signal / ON or OFF | ON: Driver door open OFF: Driver door closed |
- |
| FL Door Courtesy*1 | Front door courtesy light switch assembly signal / ON or OFF | ON: Driver door open OFF: Driver door closed |
- |
| Mem SW No. w/KeyID1 | Memory switch linked with key ID1 / NONE, MEM SW1, MEM SW2, or MEM SW3 | NONE: No switches linked with key ID1 MEM SW1: M1 switch linked with key ID1 MEM SW2: M2 switch linked with key ID1 MEM SW3: M3 switch linked with key ID1 |
- |
| Mem SW No. w/KeyID2 | Memory switch linked with key ID2 / NONE, MEM SW1, MEM SW2, or MEM SW3 | NONE: No switches linked with key ID2 MEM SW1: M1 switch linked with key ID2 MEM SW2: M2 switch linked with key ID2 MEM SW3: M3 switch linked with key ID2 |
- |
| Mem SW No. w/KeyID3 | Memory switch linked with key ID3 / NONE, MEM SW1, MEM SW2, or MEM SW3 | NONE: No switches linked with key ID3 MEM SW1: M1 switch linked with key ID3 MEM SW2: M2 switch linked with key ID3 MEM SW3: M3 switch linked with key ID3 |
- |
| Mem SW No. w/KeyID4 | Memory switch linked with key ID4 / NONE, MEM SW1, MEM SW2, or MEM SW3 | NONE: No switches linked with key ID4 MEM SW1: M1 switch linked with key ID4 MEM SW2: M2 switch linked with key ID4 MEM SW3: M3 switch linked with key ID4 |
- |
| Mem SW No. w/KeyID5 | Memory switch linked with key ID5 / NONE, MEM SW1, MEM SW2, or MEM SW3 | NONE: No switches linked with key ID5 MEM SW1: M1 switch linked with key ID5 MEM SW2: M2 switch linked with key ID5 MEM SW3: M3 switch linked with key ID5 |
- |
| Mem SW No. w/KeyID6 | Memory switch linked with key ID6 / NONE, MEM SW1, MEM SW2, or MEM SW3 | NONE: No switches linked with key ID6 MEM SW1: M1 switch linked with key ID6 MEM SW2: M2 switch linked with key ID6 MEM SW3: M3 switch linked with key ID6 |
- |
| Mem SW No. w/KeyID7 | Memory switch linked with key ID7 / NONE, MEM SW1, MEM SW2, or MEM SW3 | NONE: No switches linked with key ID7 MEM SW1: M1 switch linked with key ID7 MEM SW2: M2 switch linked with key ID7 MEM SW3: M3 switch linked with key ID7 |
- |
| Driver Seat Memory1 | Seat position memorized with M1 switch/OFF or ON | OFF: Not memorized ON: Memorized |
- |
| Driver Seat Memory2 | Seat position memorized with M2 switch/OFF or ON | OFF: Not memorized ON: Memorized |
- |
| Driver Seat Memory3 | Seat position memorized with M3 switch/OFF or ON | OFF: Not memorized ON: Memorized |
- |
*1: for LHD
*2: for RHD
ACTIVE TEST
Tech Tips
Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Turn the power switch off.
Connect the intelligent tester to the DLC3.
Turn the power switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Body / Driver Seat / Active Test.
Perform the Active Test according to the display on the intelligent tester.
| Tester Display | Test Part | Control Range | Diagnostic Note |
|---|---|---|---|
| Seat Reclining | Seat reclining operation | Front / OFF / Rear | - |
| Front Vertical Operation | Seat front vertical operation | Up / OFF / Down | - |
| Lifter Operation | Seat lifter operation | Up / OFF / Down | - |
| Seat Slide Operation | Seat sliding operation | Front / OFF / Rear | - |
| Buzzer | Buzzer operation | ON / OFF | - |