SEAT MEMORY SWITCH INSPECTION

PROCEDURE


  1. INSPECT SEAT MEMORY SWITCH (for LHD)


    1. B001MEZE09
      Text in Illustration
      *a

      Component without harness connected

      (Seat Memory Switch)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 (MRY) - 5 (E) SET switch is pressed Below 1 Ω
      2 (M1) - 5 (E) M1 switch is pressed Below 1 Ω
      3 (M2) - 5 (E) M2 switch is pressed Below 1 Ω
      4 (M3) - 5 (E) M3 switch is pressed Below 1 Ω
      1 (MRY) - 5 (E) SET switch is not pressed 10 kΩ or higher
      2 (M1) - 5 (E) M1 switch is not pressed 10 kΩ or higher
      3 (M2) - 5 (E) M2 switch is not pressed 10 kΩ or higher
      4 (M3) - 5 (E) M3 switch is not pressed 10 kΩ or higher

      If the result is not as specified, replace the seat memory switch.

  2. INSPECT SEAT MEMORY SWITCH (for RHD)


    1. A004ZJ4E01
      Text in Illustration
      *a

      Component without harness connected

      (Seat Memory Switch)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 (MRY) - 5 (E) SET switch is pressed Below 1 Ω
      2 (M1) - 5 (E) M1 switch is pressed Below 1 Ω
      3 (M2) - 5 (E) M2 switch is pressed Below 1 Ω
      4 (M3) - 5 (E) M3 switch is pressed Below 1 Ω
      1 (MRY) - 5 (E) SET switch is not pressed 10 kΩ or higher
      2 (M1) - 5 (E) M1 switch is not pressed 10 kΩ or higher
      3 (M2) - 5 (E) M2 switch is not pressed 10 kΩ or higher
      4 (M3) - 5 (E) M3 switch is not pressed 10 kΩ or higher

      If the result is not as specified, replace the seat memory switch.