SEAT BELT CONTROL ECU INSTALLATION

PROCEDURE

1. INSTALL SEAT BELT CONTROL ECU (for LHD)

   
   

   1. 

      Engage the 2 claws to install the seat belt control ECU.

2. INSTALL SEAT BELT CONTROL ECU (for RHD)

   
   

   1. 

      Engage the 2 claws to install the seat belt control ECU.

3. INSTALL ECU INTEGRATION BOX RH (for LHD)

   Click here

4. INSTALL ECU INTEGRATION BOX LH (for RHD)

   Click here

5. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

   Click here

6. INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY

   Click here

7. INSTALL INSTRUMENT SIDE PANEL

   Click here

8. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP

   Click here

9. INSTALL COWL SIDE TRIM SUB-ASSEMBLY

   Tech Tips

   Use the same procedure for the RH side and LH side Click here.

10. INSTALL FRONT DOOR SCUFF PLATE

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

11. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

    Click here

12. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

    Click here

13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

14. INSTALL REAR FLOOR BOARD UPPER NO. 3 PLATE

    Click here

15. INSTALL DECK FLOOR BOX RH

    Click here

16. INSTALL REAR NO. 3 FLOOR BOARD

    Click here

17. INSTALL REAR DECK FLOOR BOX

    Click here

18. INSTALL REAR NO. 2 FLOOR BOARD

    Click here

19. INSPECT SRS WARNING LIGHT

    Click here