FRONT POWER SEAT CONTROL SYSTEM(w/ Memory) SYSTEM DESCRIPTION


  1. FRONT POWER SEAT CONTROL SYSTEM DESCRIPTION


    • The driver seat is equipped with slide, reclining, lifter, front vertical, and lumbar support adjustment functions.

    • The memory call function uses the key ID code of the key to memorize and recall the appropriate driving position for each individual who possesses a master key or sub key.

  2. FUNCTION OF MAIN COMPONENT

    Component Function
    Position control ECU and switch assembly Based on the switch operation, seat adjuster signals are input to the position control ECU and switch assembly to adjust the seat accordingly.
    Separate type front seat cushion spring assembly Slide motor Receives a signal from the position control ECU and switch assembly, and slides the seat forward and rearward.
    Front vertical motor Receives a signal from the position control ECU and switch assembly, and raises and lowers the front of the seat cushion.
    Lifter motor Receives a signal from the position control ECU and switch assembly, and raises and lowers the seat cushion.
    Separate type front seatback spring assembly Reclining motor Receives a signal from the position control ECU and switch assembly, and tilts the seatback forward and rearward.
    Lumbar support adjuster assembly Receives a signal from the lumbar support adjustment switch (power seat switch assembly) and operates the motor to adjust lumbar support.
    Seat memory switch

    If the seat memory SET switch is being pressed when one of the M1, M2 or M3 seat memory switches is pressed, or if one of the M1, M2 or M3 switches is pressed within 3 seconds of pressing the SET switch, the outer mirror control ECU assembly (for driver side) sends the signals so that the seat position can be stored.

    Then, when a seat memory switch is pressed, a signal is sent to the outer mirror control ECU assembly (for driver side) and the seat position changes according to memory.
    Lumbar support adjustment switch (power seat switch assembly) Operates the motor built into lumbar support adjuster assembly (separate type front seatback spring assembly) according to switch operation.

  3. SYSTEM OPERATION

    The front power seat functions which can be adjusted with the power seat motors and memorized are shown below.

    Seat Adjustment Function Driver Seat Passenger Seat
    Sliding Power and Memory Manual
    Reclining Power and Memory Manual
    Front Vertical Power and Memory Manual
    Lifter Power and Memory Manual
    Lumbar Support Power Manual

    The seat memory switch sends memory switch information to the outer mirror control ECU assembly (for driver side). Then the information is sent to the main body ECU (multiplex network body ECU) via CAN and then an instruction to memorize the seat position is sent to the position control ECU and switch assembly via CAN. As a result, the seat position is memorized.