SEAT POSITION SENSOR ON-VEHICLE INSPECTION

CAUTION / NOTICE / HINT

CAUTION:

Be sure to correctly follow the removal and installation procedures for the seat position airbag sensor.

PROCEDURE


  1. INSPECT SEAT POSITION AIRBAG SENSOR (for Vehicle not Involved in Collision)


    1. Perform a diagnostic system check Click here.

  2. INSPECT SEAT POSITION AIRBAG SENSOR (for Vehicle Involved in Collision)


    1. Perform a diagnostic system check Click here.

    2. Visually check for defects with the seat position airbag sensor removed from the vehicle.


      1. The defects are as follows:


        • Cracks on the sensor housing

        • Dents on the sensor housing

        • Chips on the sensor housing

        • Cracks or other damage to the connector

        OK
        No defects are found.

        Tech Tips

        If any of the defects is found, replace the seat position airbag sensor with a new one.