FRONT SEAT SIDE AIRBAG ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

CAUTION:


  • Be sure to read Precaution thoroughly before servicing Click here.

  • If the side airbag was deployed, replace the front seat airbag assembly, front seatback cover, separate type front seatback spring assembly, separate type front seatback cover and separate type front seatback pad with a new one.

  • Wear protective gloves. Sharp areas on the seat frame and adjuster may injure your hands.

Tech Tips

Use the same procedures for the LH side and RH side.

PROCEDURE


  1. REMOVE FRONT SEAT ASSEMBLY

    for Manual Seat: Click here

    for Power Seat: Click here

  2. REMOVE AIRBAG WIRE HARNESS (for Manual Seat)


    1. B001N4Q

      Disconnect the rubber band.

    2. B001N3O

      Disengage the claw and 3 clamps to remove the airbag wire harness.

    3. B001MN3

      Disengage the fastener and separate the airbag wire harness.

    4. w/ Seat Heater System:


      1. B001N11

        Disconnect the connector.

      2. Disengage the clamp.

  3. REMOVE AIRBAG WIRE HARNESS (for Power Seat)


    1. B001N2C

      Disconnect the rubber band.

    2. B001KGF

      Disengage the claw and 3 clamps to remove the airbag wire harness.

    3. B001MN3

      Disengage the fastener and separate the airbag wire harness.

    4. w/ Seat Heater System:


      1. B001N11

        Disconnect the connector.

      2. Disengage the clamp.

  4. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD

    for Manual Seat: Click here

    for Power Seat: Click here

  5. REMOVE FRONT SEATBACK COVER

    for Manual Seat: Click here

    for Power Seat: Click here

  6. REMOVE FRONT SEAT AIRBAG ASSEMBLY


    1. B001MI5

      Disengage the 2 clamps.

    2. Remove the 2 nuts and the front seat airbag assembly.

      CAUTION:


      • The nuts must not be reused.

      • Make sure that the separate type front seatback spring assembly is not deformed. If it is, replace it with a new one.