FRONT PASSENGER AIRBAG ASSEMBLY INSTALLATION

PROCEDURE

1. INSTALL NO. 3 INSTRUMENT PANEL WIRE

   
   

   1. 

      Connect the 2 airbag connectors to the instrument panel passenger airbag assembly.

      Note

      
      

      • When connecting any airbag connector, take care not to damage the airbag wire harness.

      • Be sure to only connect the connectors to each corresponding color.

   2. Push in the 2 locks to install the No. 3 instrument panel wire to the instrument panel passenger airbag assembly.

2. INSTALL INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY

   
   

   1. Engage the 3 hooks.

   2. Push the instrument panel passenger airbag assembly to engage the 3 hooks.

   3. Install the 2 screws to install the instrument panel passenger airbag assembly.

3. INSTALL UPPER INSTRUMENT PANEL ASSEMBLY

   Click here

4. CONNECT NO. 3 INSTRUMENT PANEL WIRE

   
   

   1. Check that the power switch is off.

   2. Check that the cable is disconnected from the negative (-) auxiliary battery terminal.

      CAUTION:

      Wait at least 90 seconds after disconnecting the cable from the negative (-) auxiliary battery terminal to disable the SRS system.

   3. 

      Connect the connector.

      Note

      When connecting any airbag connector, take care not to damage the airbag wire harness.

5. INSTALL MULTI-DISPLAY (for 7 Inch Display)

   Click here