COMBINATION METER INSTALLATION

PROCEDURE

1. INSTALL COMBINATION METER ASSEMBLY

   
   

   1. Connect the connector.

   2. Engage the 2 clips.

   3. Install the combination meter assembly with the 2 screws.

   4. Engage the clamp.

2. INSTALL METER HOOD SUB-ASSEMBLY

   Click here

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

4. INSTALL REAR FLOOR BOARD UPPER NO. 3 PLATE

   Click here

5. INSTALL DECK FLOOR BOX RH

   Click here

6. INSTALL REAR NO. 3 FLOOR BOARD

   Click here

7. INSTALL REAR DECK FLOOR BOX

   Click here

8. INSTALL REAR NO. 2 FLOOR BOARD

   Click here