METER / GAUGE SYSTEM FREEZE FRAME DATA


  1. FREEZE FRAME DATA

    Whenever a meter DTC is detected, the combination meter assembly stores the current vehicle state as freeze frame data.

  2. CHECK FREEZE FRAME DATA


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body / Combination Meter / DTC.

    5. According to the GTS display, select a DTC that stored freeze frame data.

    6. Read the freeze frame data recorded when the DTC was stored.

      Combination Meter
      Tester Display Condition Displayed Item
      B1503*2 Exhaust Heat Management Warning Detected

      • Trip

      • Elapsed time after turning the power switch on (IG)
      B150A*1 Lost Communication with HMI-LAN
      B150B*1 Lost Communication with Gigabit Video Interface
      U0100 Lost Communication with ECM / PCM "A"
      U0103 Lost Communication with Gear Sift Module "A"
      U0129 Lost Communication with Skid Control ECU
      U0131 Lost Communication with Power Steering Control Module
      U0142 Lost Communication with Main Body ECU
      U0151 Lost Communication with Airbag ECU
      U0163*1 Lost Communication with Navigation Control Module
      U023A*3 Lost Communication with Front Camera Module
      U1104*3 Lost Communication with Driving Support ECU

      • *1: w/ Navigation System

      • *2: w/ Exhaust Heat Recirculation System

      • *3: w/ Forward Recognition Camera

  3. CLEAR FREEZE FRAME DATA

    Note

    Clearing the DTCs will also clear the freeze frame data.


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Clear DTCs and freeze frame data.

      Click here