METER / GAUGE SYSTEM FREEZE FRAME DATA


  1. FREEZE FRAME DATA


    1. Whenever a meter DTC is detected, the combination meter assembly stores the current vehicle state as freeze frame data.

  2. CHECK FREEZE FRAME DATA


    1. Connect the intelligent tester to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Combination Meter / DTC.

    5. According to the intelligent tester display, select a DTC that stored freeze frame data.

    6. Read the freeze frame data recorded when the DTC was stored.

      Combination Meter
      Tester Display Condition Displayed Item
      B1503 Exhaust Heat Management Warning Detected

      • Trip

      • Elapsed time after turning the power switch on (IG)
      B150A*1 Lost Communication with HMI-LAN
      B150B*1 Lost Communication with Gigabit Video Interface
      U0100 Lost Communication with ECM / PCM "A"
      U0129 Lost Communication with Skid Control ECU
      U0131 Lost Communication with Power Steering Control Module
      U0142 Lost Communication with Main Body ECU
      U0151 Lost Communication with Airbag ECU
      U0163*1 Lost Communication with Navigation Control Module

      • *1: for Multi-information Display (Color Type)

  3. CLEAR FREEZE FRAME DATA

    Note

    Clearing the DTCs will also clear the freeze frame data.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the power switch on (IG).

    3. Clear DTCs and freeze frame data Click here.