COMBINATION METER ASSEMBLY
Measure the voltage, resistance and check for pulses according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| H19-1 (MSCH)*1 - Body ground | G - Body ground | Local bus communication line | - | - |
| H19-2 (MSCL)*1 - Body ground | Y - Body ground | Local bus communication line | - | - |
| H19-3 (LVWG)*2 - Body ground | L - Body ground | Headlight leveling signal | Power switch on (IG), headlight leveling indicator light off | 11 to 14 V |
| Power switch on (IG), headlight leveling indicator light on | Below 1 V | |||
| H19-4 (RRSB)*3 - Body ground | R - Body ground | Rear right seat belt buckle switch signal | Power switch on (IG), rear seat belt buckle switch RH unfastened | Below 1 V |
| Power switch on (IG), rear seat belt buckle switch RH fastened | 11 to 14 V | |||
| H19-5 (RCSB)*3 - Body ground | L - Body ground | Rear center seat belt buckle switch signal | Power switch on (IG), rear seat belt buckle switch center unfastened | Below 1 V |
| Power switch on (IG), rear seat belt buckle switch center fastened | 11 to 14 V | |||
| H19-6 (RLSB)*3 - Body ground | B - Body ground | Rear left seat belt buckle switch signal | Power switch on (IG), rear seat belt buckle switch LH unfastened | Below 1 V |
| Power switch on (IG), rear seat belt buckle switch LH fastened | 11 to 14 V | |||
| H19-7 (WLVL) - Body ground | LG - Body ground | Washer fluid level signal | Power switch on (IG), washer fluid level not low | 4 to 6 V |
| Power switch on (IG), washer fluid level low | Below 1 V | |||
| H19-8 (S) - Body ground | G - Body ground | Engine oil pressure signal | Power switch on (IG), engine oil pressure warning light off | 4 to 6 V |
| Power switch on (IG), engine oil pressure warning light on | Below 1 V | |||
| H19-9 (E2) - Body ground | W-B - Body ground | Ground | Always | Below 1 Ω |
| H19-10 (ILL-) - Body ground | B - Body ground | Illumination signal | Power switch on (IG), light control switch in tail or head position | Pulse generation |
| H19-11 (ECOD) - Body ground | P - Body ground | Combination switch assembly signal | Power switch on (IG), combination switch assembly not operated | 11 to 14 V |
| Power switch on (IG), combination switch assembly turns counterclockwise (on ECO position) | Below 1 V | |||
| H19-12 (IMAN) - Body ground | R - Body ground | Combination switch assembly signal | Power switch on (IG), combination switch assembly not operated | 11 to 14 V |
| Power switch on (IG), combination switch assembly turns clockwise (on SPORT position) | Below 1 V | |||
| H19-13 (ACIN) - Body ground | L - Body ground | Rear passenger seat condition signal | Power switch on (IG), rear passenger seat not occupied | Below 1 V |
| Power switch on (IG), any of rear passenger seat occupied | 4 to 6 V | |||
| H19-14 (REV) - Body ground | G - Body ground | Light control rheostat signal | Power switch on (IG), light control rheostat turns fully upwards (MAX.) | 8 kΩ or higher |
| Power switch on (IG), light control rheostat position between (MIN.) and (MAX.) | 50 to 8 kΩ | |||
| Power switch on (IG), light control rheostat turns fully downwards (MIN.) | Below 50 Ω | |||
| H19-15 (TC) - H19-16 (SW1) | L - SB | Tail cancel signal | Power switch on (IG), light control rheostat turns fully upwards (MAX.) | 8 kΩ or higher |
| Power switch on (IG), light control rheostat position except above | Below 8 kΩ | |||
| H19-16 (SW1) - Body ground | SB - Body ground | Light control rheostat signal | Always | 4 to 6 V |
| H19-17 (MSM+)*1 - Body ground | R - Body ground | Steering pad switch assembly signal | Power switch on (IG), enter, top and back switches on steering pad switch assembly not pushed | 4.8 to 5.2 V |
| H19-19 (STRG)*4 - Body ground | P*6 or R*7 - Body ground | Steering pad switch assembly signal | Power switch on (IG), DISP switch not pressed | 4.8 to 5.2 V |
| Power switch on (IG), DISP switch pressed | Below 1 V | |||
| H19-20 (MSTI)*1 - Body ground | GR - Body ground | Steering pad switch assembly signal | Power switch on (IG), up, down, right and left switches on steering pad switch assembly not pushed | 4.8 to 5.2 V |
| H19-21 (IG2) - Body ground | BR - Body ground | Power switch signal | Power switch off | Below 1 V |
| Power switch on (IG) | 11 to 14 V | |||
| H19-22 (B) - Body ground | V - Body ground | Auxiliary battery | Power switch off | 11 to 14 V |
| H19-23 (B) - Body ground | G - Body ground | Turn indicator light signal | Power switch on (IG), turn signal RH indicator light off | Below 1 V |
| Power switch on (IG), turn signal RH indicator light blinking | Below 1 V ←→ 11 to 14 V | |||
| H19-24 (B) - Body ground | Y - Body ground | Turn indicator light signal | Power switch on (IG), turn signal LH indicator light off | Below 1 V |
| Power switch on (IG), turn signal LH indicator light blinking | Below 1 V ←→ 11 to 14 V | |||
| H19-25 (RLMT)*3 - Body ground | BE - Body ground | Rear left seat belt warning output signal | Power switch on (IG), rear seat belt indicator light LH off | 11 to 14 V |
| Power switch on (IG), rear seat belt indicator light LH on | Below 1 V | |||
| H19-26 (TWS3) - H19-9 (E2) | GR - W-B | Engine coolant temperature sensor signal | Power switch on (IG), coolant temperature below 113°C (235°F) | 0.2 to 4.8 V |
| Power switch on (IG), coolant temperature below 120°C (248°F) | Below 0.15 V | |||
| H19-27 (L) - H19-30 (FE) | SB - P | Fuel signal | Power switch on (IG), fuel level not low | 4 to 14 V |
| Power switch on (IG), fuel level low | 4 V or less | |||
| H19-28 (EFI) - Body ground | R - Body ground | MIL (Check engine warning light) signal | Power switch on (IG), MIL off | 11 to 14 V |
| Power switch on (IG), MIL on | Below 1 V | |||
| H19-29 (P/SB) - Body ground | B - Body ground | Front passenger seat belt buckle switch signal | Power switch on (IG), front passenger seat occupied, and front passenger seat belt unfastened | Below 1 V |
| Power switch on (IG), front passenger seat occupied, and front passenger seat belt fastened | 11 to 14 V | |||
| H19-31 (CANL) - Body ground | V - Body ground | CAN communication line | - | - |
| H19-32 (CANH) - Body ground | P - Body ground | CAN communication line | - | - |
| H19-33 (EP) - Body Ground | W-B - Body ground | Ground | Always | Below 1 Ω |
| H19-34 (E2) - Body Ground | G - Body ground | Ground | Always | Below 1 Ω |
| H19-35 (RRMT)*3 - Body ground | BR - Body ground | Rear right seat belt warning output signal | Power switch on (IG), rear seat belt indicator light RH off | 11 to 14 V |
| Power switch on (IG), rear seat belt indicator light RH on | Below 1 V | |||
| H19-36 (SW3) - Body ground | W - Body ground | Ground | Always | Below 1 Ω |
| H19-37 (TIRE)*5 - Body ground | G - Body ground | Tire pressure warning light signal | Power switch on (IG), tire pressure warning light off | 3.2 V or higher |
| Power switch on (IG), tire pressure warning light on | Below 3.2 V | |||
| H19-38 (RCMT)*3 - Body ground | Y - Body ground | Rear center seat belt warning output signal | Power switch on (IG), rear seat belt indicator light center off | 11 to 14 V |
| Power switch on (IG), rear seat belt indicator light center on | Below 1 V | |||
| H19-39 (SI) - Body ground | V - Body ground | Speed signal for other system (Input) | Power switch on (IG), wheel being rotated | Pulse generation (See waveform 1) |
| H19-40 (+S) - Body ground | V - Body ground | Speed signal for other system (Output) | Power switch on (IG), wheel being rotated | Pulse generation (See waveform 1) |
| H177-1 (GVIF) - Body ground*1 | B - Body ground | Video signal (Digital) line | - | - |
*1: for Multi-information Display (Color Type)
*2: w/ Automatic Headlight Beam Level Control
*3: w/ Rear Seat Belt Warning
*4: for Multi-information Display (Monochrome Type)
*5: w/ Tire Pressure Warning System
*6: for LHD
*7: for RHD
Waveform 1 (Reference):
| Item | Condition |
|---|---|
| Tool setting | 5 V/DIV., 20 ms./DIV. |
| Vehicle condition | Power switch on (IG), wheel being rotated |
Tech Tips
When the system is functioning normally, one wheel revolution generates 4 pulses. As the vehicle speed increases, the width indicated by (A) in the illustration narrows.
COMBINATION METER ASSEMBLY INNER CIRCUIT