FRONT DOOR COURTESY SWITCH INSTALLATION

PROCEDURE

1. INSTALL FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY

   
   

   1. Using a T30 "TORX" socket wrench, install the front door courtesy light switch assembly with the bolt.

      Torque:

      6.3 N*m  { 64 kgf*cm, 56 in.*lbf }

   2. Connect the connector.

2. INSTALL CENTER PILLAR LOWER GARNISH

   Click here

3. CONNECT FRONT SEAT OUTER BELT ASSEMBLY

   Click here

4. INSTALL LAP BELT OUTER ANCHOR COVER

   Click here

5. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP

   for LH Side: Click here

   for RH Side: Click here

6. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP

   for LH Side: Click here

   for RH Side: Click here

7. INSTALL REAR DOOR SCUFF PLATE

   Click here

8. INSTALL FRONT DOOR SCUFF PLATE

   Click here