METER / GAUGE SYSTEM CUSTOMIZE PARAMETERS

PROCEDURE

1. CUSTOMIZE METER / GAUGE SYSTEM

   
   

   1. Customizing with the GTS

      
      

      1. Connect the GTS to the DLC3.

      2. Turn the power switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Body / Combination Meter / Utility / Customize / Warning or Display.

      5. Select the setting by referring to the table below.

         Note

         
         

         • Be sure to record the current value before customizing.

         Warning

         Tester Display	Default	Content	Setting	Relevant ECU
         Reverse Buzzer	Single	Function to change the type of the reverse warning buzzer	Single or Continual	Combination meter assembly

         Display

         Tester Display	Default	Content	Setting	Relevant ECU
         ODO Display Time After IG OFF Setting*	30s	Function to change the ODO display time after the power switch is turned off	OFF, 30s, 60s or 600s	Combination meter assembly

         
         

         • *: for Multi-information Display (Color Type)