INTRUSION SENSOR INSTALLATION

PROCEDURE


  1. INSTALL INTRUSION SENSOR (THEFT WARNING ULTRASONIC SENSOR) (w/o Sliding Roof)


    1. Install the intrusion sensor (theft warning ultrasonic sensor) to the base with the 4 screws.

    2. A004Z1DE01
      Text in Illustration
      *1 Switch lever
      *2 Switch knob

      Install the board so that the switch lever securely engages with the hole of the switch knob as shown in the illustration.

    3. Install the cover with the 7 screws.

    4. Engage the 2 clamps.

    5. Install the 2 screws and connect the connector.

    6. A004XHO

      Put the tape back to the positions shown in the illustration in order to secure the cord to the map light assembly.

    7. w/ Microphone:


      1. Engage the clamp and connect the connector.

      2. A004W55

        Put the tape back to the positions shown in the illustration in order to secure the cord to the map light assembly.

  2. INSTALL INTRUSION SENSOR (THEFT WARNING ULTRASONIC SENSOR) (w/ Sliding Roof)


    1. Install the intrusion sensor (theft warning ultrasonic sensor) to the base with the 4 screws.

    2. A004Z1DE01
      Text in Illustration
      *1 Switch lever
      *2 Switch knob

      Install the board so that the switch lever securely engages with the hole of the switch knob as shown in the illustration.

    3. Install the cover with the 7 screws.

    4. w/ Microphone:


      1. Engage the clamp and connect the connector.

      2. A004Y36

        Put the tape back to the position shown in the illustration in order to secure the cord to the map light assembly.

    5. Engage the 6 clamps.

    6. Install the 2 screws and connect the connector.

  3. INSTALL MAP LIGHT ASSEMBLY

    Click here