LIGHTING SYSTEM CUSTOMIZE PARAMETERS

PROCEDURE

1. CUSTOMIZE LIGHTING SYSTEM

   
   

   1. Customizing with the GTS

      Note

      
      

      • When the customer requests a change in a function, first make sure that the function can be customized.

      • Be sure to make a note of the current settings before customizing.

      • When troubleshooting a function, first make sure that the function is set to the default setting.

      Tech Tips

      The following items can be customized.

      
      

      1. Connect the GTS to the DLC3.

      2. Turn the power switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Body Electrical / Main Body / Utility / Customize / Illuminated Entry.

      5. Select the setting by referring to the table below.

         Illuminated Entry

         Tester Display	Default	Content	Setting	Relevant ECU
         Lighting Time	15 s	Changes the lighting time after closing all of the doors. (It will fade out immediately in case of turning the power switch from off to on (ACC) or on (IG).)	15 s, 7.5 s or 30 s	Main body ECU (Multiplex network body ECU)
         I/L when ACC OFF	ON	Lights up the power switch illumination, front interior lights and rear interior light when the power switch is turned from on (ACC) or on (IG) to off.	ON or OFF
         I/L ON W/Door Key Unlock	ON	Lights up the power switch illumination, front interior lights and rear interior light when doors are unlocked using a mechanical key or door control transmitter.	ON or OFF
         Room Light when Aprchd	ON	Lights up the power switch illumination, front interior lights, rear interior light and footwell lights when a key enters any actuation area around the doors.	ON or OFF
         Inside Foot Light	ON	Lights up the footwell lights illumination.	ON or OFF
         Center Console Spot Light	ON	Lights up the center console spot light when the power switch is turned on (ACC) or on (IG).	ON or OFF
         Light Control	ON	Dims (ON setting) or turns off (OFF setting) the footwell lights when all of the following conditions are met: The power switch is on (IG). The shift lever is moved to select a shift state other than park (P). All doors are closed.	ON or OFF
         Interior Light Control	ON	Lights up the front interior lights, footwell lights and center console spot light when the illuminated entry function is operating.	ON or OFF

   2. Customizing using the Multi-display

      
      

      1. Turn the power switch on (IG).

      2. Enter the following menus: APPS / Setup / Vehicle / Vehicle customization / Lights settings.

      3. Select the setting by referring to the table below.

         Lights settings

         Display	Default	Content	Setting	Relevant ECU
         Interior lights off timer	15 sec.	Changes the lighting time after closing all of the doors. (The lights will fade out immediately if the power switch is turned from off to on (ACC) or on (IG).)	Off, 7.5 sec., 15 sec., or 30 sec.	Main body ECU (Multiplex network body ECU)

   3. Customizing with the combination meter assembly

      Tech Tips

      
      

      • Press and hold the DISP switch (steering pad switch assembly) when entering an item.

      • Briefly press the DISP switch (steering pad switch assembly) when selecting an item.

      
      

      1. Turn the power switch on (IG).

      2. Enter the following menus: Settings / Vehicle Settings

      3. Select the setting by referring to the table below.

         Display	Default	Content	Setting	Relevant ECU
         Int. Lights Off Adjustment	15 sec.	Changes the lighting time after closing all of the doors. (The lights will fade out immediately if the power switch is turned from off to on (ACC) or on (IG).)	15 sec., 7.5 sec., 30 sec. or OFF	Main body ECU (Multiplex network body ECU)

      4. Press and hold the DISP switch (steering pad switch assembly).

      5. The setting completion screen will be displayed.

      6. Return to the item selection screen.