BACK DOOR LOCK INSTALLATION

PROCEDURE

1. INSTALL BACK DOOR LOCK ASSEMBLY

   Tech Tips

   Make sure to remove the string before installing a new back door lock assembly.

   
   

   1. Apply MP grease to the sliding parts of the back door lock assembly.

   2. Install the back door lock assembly with the 3 bolts.

      Torque:

      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

   3. Engage the 4 clamps.

   4. Connect the connector.

2. INSPECT BACK DOOR

   Click here

3. ADJUST BACK DOOR

   Click here

4. INSTALL REAR DECK TRIM COVER

   Click here

5. INSTALL DECK TRIM SERVICE HOLE COVER

   Click here

6. INSTALL DECK FLOOR BOX LH (w/o Woofer)

   Click here

7. INSTALL REAR NO. 4 FLOOR BOARD (w/o Woofer)

   Click here

8. INSTALL REAR NO. 4 FLOOR BOARD (w/ Woofer)

   Click here

9. INSTALL DECK FLOOR BOX RH

   Click here

10. INSTALL REAR NO. 3 FLOOR BOARD

    Click here

11. INSTALL REAR DECK FLOOR BOX

    Click here

12. INSTALL REAR NO. 2 FLOOR BOARD

    Click here