POWER DOOR LOCK CONTROL SYSTEM PRECAUTION


  1. NOTICE FOR INITIALIZATION

    Note

    When disconnecting the cable from the negative (-) auxiliary battery terminal, initialize the following system after the cable is reconnected.

    System Name See Procedure
    Parking Assist Monitor System (w/ Parallel Parking Assist Function)

    Click here

    Parking Assist Monitor System (w/o Parallel Parking Assist Function)
    Power Door Lock Control System

  2. PRECAUTIONS WHEN USING INTELLIGENT TESTER


    1. When using the Intelligent tester with the power switch off to troubleshoot:

      Connect the Intelligent tester to the vehicle, and turn the courtesy light switch on and off at 1.5-second intervals until communication between the Intelligent tester and the vehicle begins.

    2. After all DTCs are cleared, check if the trouble occurs again 6 seconds after the power switch is turned on (IG).