ULTRASONIC SENSOR(for Front Side) REMOVAL

PROCEDURE


  1. REMOVE FRONT BUMPER ASSEMBLY

    Click here

  2. REMOVE NO. 1 ULTRASONIC SENSOR

    Tech Tips

    Use the same procedure for all No. 1 ultrasonic sensors.


    1. B001KZU

      Disconnect the connector.

      Tech Tips

      This illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.

    2. B001N6Q

      Disengage the 2 claws to remove the No. 1 ultrasonic sensor.

      Tech Tips

      This illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.

  3. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER

    Tech Tips


    • Use the same procedure for all No. 1 ultrasonic sensor retainers.

    • Perform this step only when necessary.


    1. B001N32

      Remove the No. 1 ultrasonic sensor retainer.

      Tech Tips

      This illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.

    2. Remove any remaining double-sided tape from the front bumper assembly.