Tech Tips
Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
Inspect the fuses and relays related to this system before inspecting the suspected areas below.
To confirm the operation condition of this system, refer to Operation Explanation (System Description) Click here.
| Symptom | Suspected Area | See page |
|---|---|---|
| When reverse (R) is selected, an image of the area behind the vehicle is not displayed (the color of the LED on the inner rear view mirror assembly is green) | Proceed to "Reverse Signal Circuit" | |
| Proceed to "Image from Camera for Rear View Monitor is Abnormal" | ||
| Inner rear view mirror assembly | ||
| When reverse (R) is selected, an image of the area behind the vehicle is not displayed (the color of the LED on the inner rear view mirror assembly does not change to green) | Proceed to "Inner Rear View Mirror Power Source Circuit" | |
| Inner rear view mirror assembly | ||
| Map light assembly | ||
| When reverse (R) is selected, a blue screen is displayed for 3 seconds before it disappears | Proceed to "Image from Camera for Rear View Monitor is Abnormal" | |
| Inner rear view mirror assembly | ||
| When reverse (R) is not selected, an image of the area behind the vehicle is displayed | Proceed to "Reverse Signal Circuit" | |
| Inner rear view mirror assembly | ||
| Image from the camera for the rear view monitor is abnormal (color, disorder of picture) | Proceed to "Image from Camera for Rear View Monitor is Abnormal" | |
| Inner rear view mirror assembly | ||
| When an image of the area behind the vehicle is displayed, the lines are misaligned (the image from the camera is tilted) | Check that the camera is correctly installed | |
| Guide lines are not displayed | Rear television camera assembly |