TIRE PRESSURE WARNING RECEIVER INSTALLATION

PROCEDURE

1. INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER

   
   

   1. 

      Connect the connector to the tire pressure warning ECU and receiver.

   2. 

      *A	for Type A
      *B	for Type B

      Engage the 2 tabs into the holes to temporarily install the tire pressure warning ECU and receiver.

   3. Install the tire pressure warning ECU and receiver with the bolt.

      Torque:

      for Type A

      8.3 N*m  { 85 kgf*cm, 73 in.*lbf }

      for Type B

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

2. INSTALL ROOF HEADLINING ASSEMBLY

   Click here

3. INSPECT TIRE PRESSURE WARNING SYSTEM

   Click here