FRONT LOWER SUSPENSION ARM INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips

The front lower No. 1 suspension arm sub-assembly LH can be installed directly to the vehicle.

PROCEDURE


  1. TEMPORARILY TIGHTEN FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY RH

    Click here

  2. TEMPORARILY TIGHTEN FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH


    1. Temporarily install the front lower No. 1 suspension arm sub-assembly LH to the front suspension crossmember sub-assembly with the 2 bolts and nut.

      Note

      Because the nut has its own stopper, do not turn the nut.

  3. CONNECT FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH

    Click here

  4. INSTALL FRONT WHEELS

    Torque:
    103 N*m  { 1050 kgf*cm, 76 ft.*lbf }

  5. STABILIZE SUSPENSION


    1. Lower the vehicle.

    2. Press down on the vehicle several times to stabilize the suspension.

  6. FULLY TIGHTEN FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH


    1. A004XR8E04

      Fully tighten the bolt A and B.

      Torque:
      Bolt A
      233 N*m  { 2376 kgf*cm, 172 ft.*lbf }
      Bolt B
      214 N*m  { 2182 kgf*cm, 158 ft.*lbf }

      Note

      Because the nut has its own stopper, do not turn the nut.

  7. INSTALL NO. 1 ENGINE UNDER COVER

  8. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT

    Click here