STEERING KNUCKLE INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL STEERING KNUCKLE


    1. Secure the steering knuckle between aluminum plates in a vise.

      Note

      Do not overtighten the vise.

    2. Install the front axle hub sub-assembly and front disc brake dust cover with the 4 bolts.

      Torque:
      40 N*m  { 408 kgf*cm, 30 ft.*lbf }

  2. INSTALL FRONT LOWER BALL JOINT ASSEMBLY

    Click here

  3. INSTALL FRONT AXLE ASSEMBLY

    Click here