TCM REMOVAL
PROCEDURE
-
PRECAUTION
CAUTION:
Be sure to read Precaution thoroughly before servicing Click here.
Note
After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work Click here.
-
REMOVE REAR NO. 2 FLOOR BOARD
-
REMOVE REAR DECK FLOOR BOX
-
REMOVE REAR NO. 3 FLOOR BOARD
-
REMOVE DECK FLOOR BOX RH
-
REMOVE REAR FLOOR BOARD UPPER NO. 3 PLATE
-
DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
-
REMOVE FRONT DOOR SCUFF PLATE RH (for LHD)
Tech Tips
Use the same procedure described for the LH side Click here.
-
REMOVE FRONT DOOR SCUFF PLATE LH (for RHD)
-
REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH (for LHD)
Tech Tips
Use the same procedure described for the LH side Click here.
-
REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH (for RHD)
-
DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP RH (for LHD)
Tech Tips
Use the same procedure described for the LH side Click here
-
DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH (for RHD)
-
REMOVE INSTRUMENT SIDE PANEL RH (for LHD)
-
REMOVE INSTRUMENT SIDE PANEL LH (for RHD)
-
REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)
-
REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)
-
REMOVE LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY
-
REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY
-
REMOVE ECU INTEGRATION BOX RH (for LHD)
-
REMOVE ECU INTEGRATION BOX LH (for RHD)
-
REMOVE TRANSMISSION CONTROL ECU ASSEMBLY
-
Text in Illustration *A for LHD *B for RHD Disengage the 2 claws and remove the transmission control ECU assembly from the ECU integration box.
-