DRIVING SUPPORT BUZZER INSTALLATION

PROCEDURE

1. INSTALL SKID CONTROL BUZZER ASSEMBLY

   
   

   1. Connect the connector.

   2. Engage the clamp to install the skid control buzzer assembly.

2. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (for LHD)

   Click here

3. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

   Click here

4. INSTALL POWER STEERING ECU ASSEMBLY (for RHD)

   Click here

5. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

   Click here

6. PERFORM DIAGNOSTIC SYSTEM CHECK

   Click here

7. INSPECT SRS WARNING LIGHT

   Click here