MILLIMETER WAVE RADAR SENSOR REMOVAL

PROCEDURE


  1. REMOVE FRONT BUMPER ASSEMBLY

    Click here

  2. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY


    1. B001NAH

      Disconnect the connector.

    2. B001KO7C01
      B001KHV Bolt
      B001NB3 Screw

      Remove the 2 bolts and 2 screws.

    3. Disengage the 2 guides to remove the millimeter wave radar sensor assembly.

      Note

      Do not reuse the millimeter wave radar sensor assembly if it has been dropped or subjected to a severe impact.