CRUISE CONTROL MAIN SWITCH INSPECTION

PROCEDURE


  1. INSPECT CRUISE CONTROL SWITCH


    1. Measure the resistance according to the value(s) in the table below.

      B001MFPC01
      *a Component without harness connected (Cruise Control Switch) - -
      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1(ECC) - 3(CCS) Cruise control switch (ON/OFF button) released 1 MΩ or higher
      Cruise control switch (ON/OFF button) pushed Below 2.5 Ω
      +RES 235 to 245 Ω
      -SET 617 to 643 Ω
      CANCEL 1509 to 1571 Ω