DRIVING SUPPORT ECU INSTALLATION

PROCEDURE

1. INSTALL DRIVING SUPPORT ECU ASSEMBLY (for LHD)

   
   

   1. 

      Engage the claw and install the driving support ECU assembly.

2. INSTALL DRIVING SUPPORT ECU ASSEMBLY (for RHD)

   
   

   1. 

      Engage the claw and install the driving support ECU assembly.

3. INSTALL ECU INTEGRATION BOX RH (for LHD)

   Click here

4. INSTALL ECU INTEGRATION BOX RH (for RHD)

   
   

   1. Install the ECU integration box RH with the nut.

   2. Install the bolt.

   3. Engage the clamp.

   4. Connect each connector.

5. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (for LHD)

   Click here

6. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (for RHD)

   Tech Tips

   Use the same procedure for the RH side and LH side Click here.

7. INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY (for LHD)

   Click here

8. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

   Click here

9. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

   Click here

10. INSTALL INSTRUMENT SIDE PANEL RH

    Click here

11. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

    Click here

12. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH (for LHD)

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

13. INSTALL FRONT DOOR SCUFF PLATE RH (for LHD)

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

15. INSTALL REAR FLOOR BOARD UPPER NO. 3 PLATE

    Click here

16. INSTALL DECK FLOOR BOX RH

    Click here

17. INSTALL REAR NO. 3 FLOOR BOARD

    Click here

18. INSTALL REAR DECK FLOOR BOX

    Click here

19. INSTALL REAR NO. 2 FLOOR BOARD

    Click here

20. INSPECT SRS WARNING LIGHT (for LHD)

    Click here