POWER SWITCH INSTALLATION

PROCEDURE

1. INSTALL POWER SWITCH

   
   

   1. Engage the 2 claws to install the power switch.

2. INSTALL METER HOOD SUB-ASSEMBLY

   Click here

3. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

4. INSTALL REAR FLOOR BOARD UPPER NO. 3 PLATE

   Click here

5. INSTALL DECK FLOOR BOX RH

   Click here

6. INSTALL REAR NO. 3 FLOOR BOARD

   Click here

7. INSTALL REAR DECK FLOOR BOX

   Click here

8. INSTALL REAR NO. 2 FLOOR BOARD

   Click here