POWER SWITCH INSTALLATION

PROCEDURE

1. INSTALL POWER SWITCH

   
   

   1. Engage the 2 claws to install the power switch.

2. INSTALL METER HOOD SUB-ASSEMBLY

   Click here

3. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

   
   

   1. Connect the negative auxiliary battery cable with the nut.

      Torque:

      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

      Note

      When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

4. INSTALL REAR FLOOR BOARD UPPER NO. 3 PLATE

   Click here

5. INSTALL DECK FLOOR BOX RH

   Click here

6. INSTALL REAR NO. 3 FLOOR BOARD

   Click here

7. INSTALL REAR DECK FLOOR BOX

   Click here

8. INSTALL REAR NO. 2 FLOOR BOARD

   Click here