WATER PUMP INSTALLATION

PROCEDURE


  1. INSTALL ENGINE WATER PUMP ASSEMBLY


    1. Install a new gasket.

      Tech Tips

      Be sure to clean the contact surfaces.

    2. B001KRCE03

      Install the engine water pump assembly to the timing chain cover with the 5 bolts.

      Torque:
      Bolt A
      26 N*m  { 260 kgf*cm, 19 ft.*lbf }
      Bolt B
      21 N*m  { 214 kgf*cm, 15 ft.*lbf }
      Bolt Length
      Item Length
      Bolt A 35 mm (1.38 in.)
      Bolt B 18 mm (0.709 in.)

    3. Connect the connector to the engine water pump assembly.

  2. INSTALL INLET AIR CLEANER ASSEMBLY

    Click here

  3. INSTALL WATER HOSE HOSE CLAMP

    Click here

  4. ADD COOLANT (for Engine)

    Click here

  5. INSPECT FOR COOLANT LEAK (for Engine)

    Click here

  6. INSTALL RADIATOR SUPPORT OPENING COVER

    Click here