INTAKE MANIFOLD REMOVAL

PROCEDURE


  1. REMOVE THROTTLE BODY ASSEMBLY

    Click here

  2. REMOVE MANIFOLD ABSOLUTE PRESSURE SENSOR

    Click here

  3. REMOVE PURGE VSV

    Click here

  4. REMOVE INTAKE MANIFOLD


    1. A004XUZ

      Disconnect the 2 wire harness clamps.

    2. A004WR2

      Remove the bolt and wire harness support.

    3. A004XXZ

      Remove the 2 bolts and surge tank cover.

    4. Remove the gasket from the intake manifold.

    5. A004VM8

      Disconnect the 3 connectors and 2 wire harness clamps.

    6. Remove the engine oil level dipstick.

    7. A004W6W

      Disconnect the wire harness clamp, and then remove the 2 bolts and engine oil level dipstick guide sub-assembly.

    8. Remove the O-ring from the engine oil level dipstick guide sub-assembly.

    9. A004WZ4

      Disconnect the fuel vapor feed hose and ventilation hose.

    10. A00502D

      Remove the 2 bolts, 2 nuts and intake manifold.

    11. Remove the No. 1 intake manifold to head gasket.

    12. w/ Stud Bolt:


      1. A004WIT

        Using an E6 "TORX" socket wrench, remove the 2 stud bolts.

        Tech Tips

        If a stud bolt is deformed or the threads are damaged, replace it.