EXHAUST PIPE REMOVAL

PROCEDURE


  1. DRAIN COOLANT (for Engine w/ Exhaust Heat Recirculation System)

    Click here

  2. REMOVE TAIL EXHAUST PIPE ASSEMBLY


    1. A004WFS

      Remove the 2 bolts and 2 compression springs.

    2. Remove the tail exhaust pipe assembly from the 3 exhaust pipe supports.

    3. Remove the gasket from the front exhaust pipe assembly.

  3. REMOVE FRONT NO. 3 ENGINE UNDER COVER


    1. A004YG5

      Remove the 4 clips and front No. 3 engine under cover.

  4. REMOVE FRONT CENTER FLOOR BRACE


    1. A004Z4C

      Remove the 4 bolts and front center floor brace.

  5. REMOVE HEATED OXYGEN SENSOR

    Click here

  6. REMOVE FRONT EXHAUST PIPE ASSEMBLY (w/ Exhaust Heat Recirculation System)

    CAUTION:

    Perform this procedure when the coolant is not hot.


    1. A004Z1B

      Disconnect the 2 heater water hoses.

    2. A004YLG

      Remove the 2 bolts and 2 compression springs.

    3. Remove the front exhaust pipe assembly from the 2 exhaust pipe supports.

    4. Remove the gasket from the exhaust manifold.

  7. REMOVE FRONT EXHAUST PIPE ASSEMBLY (w/o Exhaust Heat Recirculation System)


    1. A004WZJ

      Remove the 2 bolts and 2 compression springs.

    2. Remove the front exhaust pipe assembly from the 2 exhaust pipe supports.

    3. Remove the gasket from the exhaust manifold.