FUEL PUMP REASSEMBLY

PROCEDURE


  1. INSTALL FUEL PUMP


    1. A004VHWE10
      Text in Illustration
      *1 O-ring
      *2 Spacer

      Apply gasoline to a new O-ring. Then install the O-ring and spacer to the fuel pump.

    2. A004VHK

      Connect the fuel pump harness connector.

    3. A00502J

      Engage the 5 claws of the fuel pump.

      Note


      • Make sure that the O-ring is not cut or pinched during the installation.

      • Engage the claws securely.

      • Do not remove the suction filter.

    4. A004ZVB

      Engage the 2 claws of the No. 1 fuel suction support.

    5. A004YJA

      Engage the 2 claws of the fuel suction support and install the fuel filter and the fuel pump onto the fuel sub-tank.

    6. A004VL0

      Align the groove of the fuel pump filter hose with the cutout of the fuel sub-tank and install the hose.

      Note

      Do not apply excessive force to the fuel tube or the suction support.

    7. Connect the connector of the fuel pump harness.

  2. INSTALL FUEL SENDER GAUGE ASSEMBLY

    Click here