RELAY ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT RELAY


    1. Inspect IGCT MAIN relay


      1. A004YMO

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        3 - 5 Auxiliary battery voltage is not applied across terminals 1 and 2 10 kΩ or higher
        3 - 5 Auxiliary battery voltage is applied across terminals 1 and 2 Below 1 Ω

        If the result is not as specified, replace the relay.