FRAME WIRE COMPONENTS
ILLUSTRATION
| *1 | SERVICE PLUG GRIP |
ILLUSTRATION
ILLUSTRATION
ILLUSTRATION
ILLUSTRATION
| *A | for LHD | *B | w/ Cover |
| *1 | FRAME WIRE | *2 | FRONT SUSPENSION MEMBER BRACE REAR RH |
| *3 | FRONT CENTER FLOOR COVER RH | *4 | FRONT FLOOR COVER RH |
| *5 | FRONT NO. 1 FLOOR HEAT INSULATOR | *6 | TERMINAL COVER |
| *7 | WIRE HARNESS PROTECTOR | *8 | HEATER WATER PIPE SUB-ASSEMBLY |
| *9 | INVERTER RESERVE TANK ASSEMBLY | - | - |
 |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
| *T1 | Type A : 8.4 N*m (86 kgf*cm, 74 in.*lbf) Type B : 10 N*m (102 kgf*cm, 7 ft.*lbf) |
- | - |
ILLUSTRATION
| *A | for RHD | *B | w/ Cover |
| *1 | FRAME WIRE | *2 | FRONT SUSPENSION MEMBER BRACE REAR RH |
| *3 | FRONT CENTER FLOOR COVER RH | *4 | FRONT FLOOR COVER RH |
| *5 | FRONT NO. 1 FLOOR HEAT INSULATOR | *6 | TERMINAL COVER |
| *7 | WIRE HARNESS PROTECTOR | *8 | HEATER WATER PIPE SUB-ASSEMBLY |
| *9 | INVERTER RESERVE TANK ASSEMBLY | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
| *T1 | Type A : 8.4 N*m (86 kgf*cm, 74 in.*lbf) Type B : 10 N*m (102 kgf*cm, 7 ft.*lbf) |
- | - |