BATTERY COOLING FILTER INSTALLATION

PROCEDURE


  1. INSTALL NO. 1 HYBRID BATTERY INTAKE FILTER


    1. Install the No. 1 hybrid battery intake filter to the rear seat side cover RH with the red mark on the rubber part facing up as shown in the illustration.

      B001NB5E03
      Text in Illustration
      *a Red Mark *b Rubber Part
      *c Sponge *d Air Intake Port Side
      *e Side View - -

      Note

      Make sure to install the rubber part of the No. 1 hybrid battery intake filter behind the sponge, toward the air intake port side of the rear seat side cover RH.

  2. INSTALL REAR SEAT SIDE COVER RH

    Click here

  3. CLEAR DTC

    Tech Tips

    If the message "MAINTENANCE REQUIRED FOR TRACTION BATTERY COOLING PARTS SEE OWNER'S MANUAL" is displayed on the multi-information display, clean or replace the No. 1 hybrid battery intake filter, and clear the DTCs to reset the learning values even if no DTCs are output.

    Click here