ANTENNA CORD INSTALLATION

PROCEDURE

1. INSTALL ANTENNA CORD SUB-ASSEMBLY (for LHD)

   
   

   1. for 7 Inch Display:

      
      

      1. Engage the 6 clamps to install the antenna cord sub-assembly.

      2. Install the screw.

      3. Engage the 2 claws.

      4. Connect the connector.

   2. for 10.3 Inch Display:

      
      

      1. Engage the 7 clamps to install the antenna cord sub-assembly.

      2. Install the screw.

      3. Engage the 2 claws.

      4. Connect the connector.

2. INSTALL ANTENNA CORD SUB-ASSEMBLY (for RHD)

   
   

   1. Engage the 7 clamps to install the antenna cord sub-assembly.

   2. Install the screw.

   3. Engage the 2 claws.

   4. Connect the connector.

3. INSTALL DEFROSTER NOZZLE ASSEMBLY

   Click here

4. INSTALL NO. 1 HEATER TO REGISTER DUCT SUB-ASSEMBLY

   Click here

5. INSTALL NO. 3 HEATER TO REGISTER DUCT SUB-ASSEMBLY

   Click here

6. INSTALL UPPER INSTRUMENT PANEL ASSEMBLY

   Click here