ANTENNA CORD REMOVAL

PROCEDURE


  1. REMOVE UPPER INSTRUMENT PANEL ASSEMBLY

    Click here

  2. REMOVE NO. 1 HEATER TO REGISTER DUCT SUB-ASSEMBLY

    Click here

  3. REMOVE NO. 3 HEATER TO REGISTER DUCT SUB-ASSEMBLY

    Click here

  4. REMOVE DEFROSTER NOZZLE ASSEMBLY

    Click here

  5. REMOVE ANTENNA CORD SUB-ASSEMBLY (for LHD)


    1. for 7 Inch Display:


      1. Disconnect the connector.

        B001LXJ

      2. Disengage the 2 claws.

      3. Remove the screw.

      4. Disengage the 6 clamps to remove the antenna cord sub-assembly.

    2. for 10.3 Inch Display:


      1. Disconnect the connector.

        B001L3N

      2. Disengage the 2 claws.

      3. Remove the screw.

      4. Disengage the 7 clamps to remove the antenna cord sub-assembly.

  6. REMOVE ANTENNA CORD SUB-ASSEMBLY (for RHD)


    1. Disconnect the connector.

      B001LM9

    2. Disengage the 2 claws.

    3. Remove the screw.

    4. Disengage the 7 clamps to remove the antenna cord sub-assembly.