HARD DISK DRIVE INSTALLATION
PROCEDURE
-
PRECAUTION
Note
When installing the hard disk drive, eliminate static electricity by touching the vehicle body to prevent components from being damaged.
-
INSTALL HARD DISK DRIVE
-
Insert the hard disk drive in the direction shown by the arrow in the illustration to install it.
-
Install the cover with the 3 screws.
-
-
INSTALL NO. 2 RADIO BRACKET
-
INSTALL TELEMATICS TRANSCEIVER WITH BRACKET
-
INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET
-
INSTALL AIR CONDITIONING CONTROL ASSEMBLY
-
INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY
-
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
-
INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY
-
INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH
-
INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH
-
INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL
-
INSTALL NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH (for Metal Finish Panel and Urethane Panel)
-
INSTALL NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH (for Wood Panel and Bamboo Panel)
-
INSTALL INSTRUMENT SIDE PANEL
-
INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP
for LHD: Click here
for RHD: Click here
-
CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here
-
INSTALL REAR FLOOR BOARD UPPER NO. 3 PLATE
-
INSTALL DECK FLOOR BOX RH
-
INSTALL REAR NO. 3 FLOOR BOARD
-
INSTALL REAR DECK FLOOR BOX
-
INSTALL REAR NO. 2 FLOOR BOARD
-
INSPECT HARD DISK DRIVE
-
REPLACED OPERATION