PROCEDURE
PRECAUTION
Note
When removing the hard disk drive, eliminate static electricity by touching the vehicle body to prevent components from being damaged.
INSTALL RADIO RECEIVER ASSEMBLY (w/o G-BOOK System)
INSTALL RADIO RECEIVER ASSEMBLY (w/ G-BOOK System)
INSTALL HARD DISK DRIVE (w/ G-BOOK System)
INSTALL NO. 2 RADIO BRACKET
Install the No. 2 radio bracket with the 4 screws.
INSTALL NO. 1 RADIO BRACKET
Install the No. 1 radio bracket with the 4 screws.
INSTALL DOUBLE LOCK DOOR CONTROL RELAY ASSEMBLY (w/ Double Locking System)
INSTALL TELEMATICS TRANSCEIVER WITH BRACKET (w/ G-BOOK System)
INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET
Connect each connector.
Install the radio receiver assembly with bracket with the 4 bolts.
INSTALL AIR CONDITIONING CONTROL ASSEMBLY
INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY
INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH
INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH
INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL
INSTALL NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH (for Metal Finish Panel and Urethane Panel)
INSTALL NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH (for Wood Panel and Bamboo Panel)
INSTALL INSTRUMENT SIDE PANEL
INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP
for LHD: Click here
for RHD: Click here
CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here
INSTALL REAR FLOOR BOARD UPPER NO. 3 PLATE
INSTALL DECK FLOOR BOX RH
INSTALL REAR NO. 3 FLOOR BOARD
INSTALL REAR DECK FLOOR BOX
INSTALL REAR NO. 2 FLOOR BOARD
INSPECT HARD DISK DRIVE (w/ G-BOOK System)
REPLACED OPERATION (w/ Parking Assist Monitor System)