NAVIGATION SYSTEM, Diagnostic DTC:B1575

DTC Code DTC Name
B1575 GVIF Disconnected (from EMV/MM Integrated Device to Multi Display)

DESCRIPTION

The radio receiver assembly and multi-display are connected via video signal (digital) line.

This DTC is stored when a video signal (digital) line is disconnected.

DTC No. DTC Detection Condition Trouble Area
B1575 Video signal (digital) is lost.

  • Harness and connector

  • Multi-display

  • Radio receiver assembly

WIRING DIAGRAM

B001MYKE52
*a Multi-display
*b Radio Receiver Assembly
*c Video Signal (Digital)

CAUTION / NOTICE / HINT

Note

Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Navigation System Click here.

PROCEDURE


  1. REPLACE HARNESS AND CONNECTOR (RADIO RECEIVER ASSEMBLY - MULTI-DISPLAY)


    1. Replace the harness and connector with a new or known good one.

    2. Clear the DTCs Click here.

    3. Recheck for DTCs and check that no DTCs are output.

      OK
      No DTCs are output.

    OK

    END

    NG

  2. REPLACE MULTI-DISPLAY


    1. Replace the multi-display with a new or known good one Click here.

    2. Clear the DTCs Click here.

    3. Recheck for DTCs and check that no DTCs are output.

      OK
      No DTCs are output.

    OK

    END

    NG

    REPLACE RADIO RECEIVER ASSEMBLY Click here