MICROPHONE INSTALLATION

PROCEDURE


  1. INSTALL AMPLIFIER MICROPHONE ASSEMBLY


    1. Engage the 2 claws and install the amplifier microphone assembly to map knob guide.

    2. A004W9S

      Install the map knob guide as shown in the illustration.

    3. A004VWME03
      Text in Illustration
      *1 Switch lever
      *2 Switch knob

      Install the board so that the switch lever securely engages with the hole of the switch knob as shown in the illustration.

    4. Install the cover with the 7 screws.

    5. Engage the guide and connect the connector.

    6. A004VF1

      Put the tape back to the positions shown in the illustration in order to secure the cord to the map light assembly.

  2. CONNECT THEFT WARNING RADAR SENSOR (w/ Intrusion Sensor)


    1. w/o Sliding Roof:


      1. Engage the 2 clamps.

      2. Install the 2 screws and connect the connector.

      3. A004XHO

        Put the tape back to the positions shown in the illustration in order to secure the cord to the map light assembly.

    2. w/ Sliding Roof:


      1. Engage the 6 clamps.

      2. Install the 2 screws and connect the connector.

  3. INSTALL MAP LIGHT ASSEMBLY

    Click here