RADIO RECEIVER REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work Click here.

  2. REMOVE REAR NO. 2 FLOOR BOARD

    Click here

  3. REMOVE REAR DECK FLOOR BOX

    Click here

  4. REMOVE REAR NO. 3 FLOOR BOARD

    Click here

  5. REMOVE DECK FLOOR BOX RH

    Click here

  6. REMOVE REAR FLOOR BOARD UPPER NO. 3 PLATE

    Click here

  7. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  8. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP

    Tech Tips

    Use the same procedure for the RH and LH side Click here.

  9. REMOVE INSTRUMENT SIDE PANEL

    Click here

  10. REMOVE NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH (for Metal Finish Panel and Urethane Panel)

    Click here

  11. REMOVE NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH (for Wood Panel and Bamboo Panel)

    Click here

  12. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL

    Click here

  13. REMOVE UPPER NO. 2 CONSOLE PANEL GARNISH

    Click here

  14. REMOVE UPPER NO. 1 CONSOLE PANEL GARNISH

    Click here

  15. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY

    Click here

  16. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here

  17. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY

    Click here

  18. REMOVE AIR CONDITIONING CONTROL ASSEMBLY

    Click here

  19. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET


    1. B001N7P

      Remove the 4 bolts.

    2. Pull the radio receiver assembly with bracket toward the rear of the vehicle.

    3. Disconnect each connector and remove the radio receiver assembly with bracket.

  20. REMOVE DOUBLE LOCK DOOR CONTROL RELAY ASSEMBLY (w/ Double Locking System)

    Click here

  21. REMOVE NO. 1 RADIO BRACKET


    1. B001MJU

      Remove the 4 screws and No. 1 radio bracket.

  22. REMOVE NO. 2 RADIO BRACKET


    1. B001LB7

      Remove the 4 screws and No. 2 radio bracket.

  23. REMOVE RADIO RECEIVER ASSEMBLY (w/o Multi-display)

  24. REMOVE RADIO RECEIVER ASSEMBLY (w/ Multi-display)