HEATED STEERING WHEEL CONTROLLER REMOVAL

CAUTION / NOTICE / HINT

Note


  • Do not replace the spiral cable with the auxiliary battery connected and the power switch on (IG).

  • Do not rotate the spiral cable without the steering wheel with the auxiliary battery connected and the power switch on (IG).

  • Ensure that the steering wheel is installed and aligned straight when inspecting the steering sensor.

  • Do not remove the steering sensor from the spiral cable.

PROCEDURE


  1. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD

  2. REMOVE HORN BUTTON ASSEMBLY

    Click here

  3. REMOVE STEERING WHEEL ASSEMBLY

    Click here

  4. REMOVE CRUISE CONTROL SWITCH (w/ Cruise Control System)

    Click here

  5. REMOVE STEERING PAD SWITCH ASSEMBLY

    Click here

  6. REMOVE STEERING SHAKE DAMPER

    Click here

  7. REMOVE LOWER STEERING WHEEL BOSS COVER

    Click here

  8. REMOVE STEERING WHEEL HEATER CONTROL ASSEMBLY


    1. B001LLK

      Disengage the clamp.

    2. Remove the 2 screws and steering wheel heater control assembly from the lower steering wheel boss cover.