STEERING PAD SWITCH INSTALLATION

PROCEDURE

1. INSTALL STEERING PAD SWITCH ASSEMBLY

   
   

   1. 

      Text in Illustration

      *1	Pin
      *2	Guide

      Engage the 2 claws, 2 pins and 2 guides to install the steering pad switch assembly.

   2. Install the 2 screws.

      Torque:

      2.4 N*m  { 24 kgf*cm, 21 in.*lbf }

   3. 

      Text in Illustration

      *1	Clamp
      *2	Guide

      Install the clamp.

   4. Pass the wire harness through the guide.

   5. Connect the steering pad switch connector to the spiral cable.

   6. 

      Pass the wire harness over the 2 guides.

2. INSTALL HORN BUTTON ASSEMBLY

   Click here