STEERING PAD SWITCH INSTALLATION

PROCEDURE


  1. INSTALL STEERING PAD SWITCH ASSEMBLY


    1. B001MZ5C01
      *a Pin
      *b Guide

      Engage the 2 claws, 2 pins and 2 guides to install the steering pad switch assembly.

    2. Install the 2 screws.

      Torque:
      2.4 N*m  { 24 kgf*cm, 21 in.*lbf }
    3. B001KG6

      Connect the steering pad switch connector to the spiral cable sub-assembly.

    4. B001KSN

      Pass the wire harness over the 2 guides of the steering shake damper.

  2. INSTALL CRUISE CONTROL SWITCH

    Click here

  3. INSTALL HORN BUTTON ASSEMBLY

    Click here