POWER STEERING SYSTEM, Diagnostic DTC:C1521, C1531, C1532, C1533, C1534

DTC Code DTC Name
C1521 Motor Circuit Malfunction
C1531 ECU Malfunction
C1532 ECU Malfunction
C1533 ECU Malfunction
C1534 ECU Malfunction

DESCRIPTION

If the power steering ECU assembly stores these DTCs, it will shut off the motor relay circuit (built into the power steering ECU assembly) and stop power assist. However, power assist continues if DTC C1533 or C1534 is output.

DTC No. DTC Detection Condition Trouble Area
C1521 Motor overcurrent Power steering ECU assembly
C1531 ECU internal malfunction (CPU malfunction)
C1532 ECU internal malfunction (Peripheral circuit malfunction)
C1533 ECU internal malfunction (Substrate temperature sensor malfunction)
C1534 ECU internal malfunction (EEPROM error)

CAUTION / NOTICE / HINT

Note

If the steering column assembly or power steering ECU assembly has been replaced, perform rotation angle sensor value initialization and torque sensor zero point calibration Click here.

PROCEDURE


  1. CHECK FOR DTC


    1. Clear the DTCs Click here.

    2. Check for DTCs Click here.

      Result
      Result Proceed to
      DTCs (except C1521,C1531,C1532,C1533,C1534 DTC) are not output A
      DTCs (except C1521,C1531,C1532,C1533,C1534 DTC) are output B

    A

    REPLACE POWER STEERING ECU ASSEMBLY Click here

    B

    REPAIR CIRCUITS INDICATED BY OUTPUT DTCS Click here