PARKING BRAKE PEDAL(for LHD) REMOVAL

PROCEDURE


  1. REMOVE AIR CONDITIONING UNIT ASSEMBLY

    Click here

  2. REMOVE NO. 1 ELECTRICAL KEY OSCILLATOR

    Click here

  3. REMOVE NO. 2 CONSOLE BOX MOUNTING BRACKET


    1. B001L03

      Disengage the clamp.

    2. Remove the 2 bolts and No. 2 console box mounting bracket.

  4. REMOVE YAW RATE AND ACCELERATION SENSOR

    Click here

  5. REMOVE FRONT FLOOR CENTER REINFORCEMENT


    1. B001KGB

      Remove the 4 bolts and front floor center reinforcement.

  6. LOOSEN ADJUSTING NUT


    1. B001L7VE01
      Text in Illustration
      *1 Lock Nut
      *2 Adjusting Nut

      Remove the lock nut and loosen the adjusting nut.

  7. SEPARATE NO. 1 PARKING BRAKE PULL ROD SUB-ASSEMBLY


    1. B001N6IE01
      Text in Illustration
      *a Turn
      *b Hold

      Separate the No. 1 parking brake pull rod sub-assembly from the parking brake control pedal assembly as shown in the illustration.

  8. REMOVE PARKING BRAKE CONTROL PEDAL ASSEMBLY


    1. B001MYE

      Remove the 5 bolts and nut, and separate the No. 1 parking brake cable assembly.

    2. Disengage the cable from the clamp.

    3. B001M37

      Disconnect the parking brake switch connector.

    4. Disengage the wire harness clamp.

    5. B001L0I

      Remove the bolt, 2 nuts and parking brake control pedal assembly.