REAR BRAKE DISASSEMBLY

PROCEDURE


  1. REMOVE REAR DISC BRAKE PISTON


    1. A004VX8E01

      Using SST, remove the rear disc brake piston by turning it counterclockwise.

      SST
      09719-12010   ( 09719-01030 )

      Note


      • Do not damage the piston.

      • Do not allow any brake fluid to spatter.

  2. REMOVE CYLINDER BOOT


    1. Remove the cylinder boot from the rear disc brake piston.

  3. REMOVE PISTON SEAL


    1. A004W7BE08
      Text in Illustration
      *1 Vinyl Tape

      Using a screwdriver with its tip wrapped with vinyl tape, remove the piston seal from the rear disc brake cylinder assembly.

      Note

      Do not damage the inner surface or piston seal groove of the cylinder.

  4. REMOVE REAR DISC BRAKE BLEEDER PLUG CAP

  5. REMOVE REAR DISC BRAKE BLEEDER PLUG